attached to rickrack

rick-rack-in-action

I love rickrack but my befuddlement with it started when I was six or seven years old. I had a white dress with some tiny red rickrack sewn on it. The manufacturer had attached it by sewing a straight seam down the center of the rickrack, which meant that after the first washing the zigs and the zags were hopelessly curled up in the center around the stitching. Even at a young age I loved the graphic quality of the red zigzag on my white dress and was frustrated that it would never lie flat and look as pretty as I knew it should. Even at a young age I had strong opinions about design!

Since then I’ve wondered about the best way to attach rickrack. I want an elegant method of machine sewing that doesn’t detract from the zigzag from but still makes the trim lie flat washing after washing. Although I’m still trying to figure out how to attach by machine tiny rickrack, I have come up with a method for medium to large rickrack. I’ll warn you, however, that if you’re an impatient sort  you might want to stop reading right here.

rick-rack-sewing

It’s all in dropping your feed dogs. Not all sewing machines have this capability so if your machine doesn’t ask around for a friend who might lend you one that does. After I dropped the feed dogs, I replaced my regular sewing foot with the clear embroidery foot for maximum visibility along the edge of the rickrack. I chose some thread that disappears on the rickrack, but I could have also used invisible thread. Next I pinned the rickrack in place and slid it under the foot so the needle caught the edge of the rickrack and attached it beautifully to the garment. Once you’ve done one side, repeat on the other side.

If you’re new to dropping your feed dogs, here are a few hints to keep in mind. The role of the feed-dogs is to regulate the length of your stitches, so once you’ve dropped them the speed at which you move the fabric under the needle will determine the stitch length. Try to be as consistent as you can about your sewing speed or else you’ll get stitches that vary in length.

rick-rack-detail

I’m happy to report that the pink rickrack sewn onto my daughter’s pants in the photo above has weathered countless washings and hasn’t curled a bit. I’m still stumped about the tiny rickrack though. Any suggestions?

10 Comments

  1. sewpam63
    Posted March 19, 2009 at 9:14 pm | Permalink

    What about trying monofilament thread & a little zig zag stitch for that oh-so-cute tiny rick rack?!

  2. gwensmom
    Posted March 19, 2009 at 9:33 pm | Permalink

    Or maybe a double needle.

  3. Posted March 20, 2009 at 9:24 am | Permalink

    I have been experimenting with that myself. I haven’t yet tried dropping my feed dogs, OK I admit I don’t even know if I can do that on my machine or not.

  4. Posted March 20, 2009 at 10:14 am | Permalink

    This looks really, really cute. I love the pants! Just wanted to toss in the thought that if your machine’s feed dogs can’t drop, there are ways to cover them so that they no longer function. A quick googling should solve the problem for those who are stuck in that predicament.

    Sorry I can’t help with the tiny stuff. I experience the same frustration as your younger self! :)

  5. Posted March 25, 2009 at 10:00 pm | Permalink

    Thanks for sharing this idea! I am making a quilt with tulips. Instead of using fabric for the stems, I bought the large rick rack. I sewed the first one down the middle and didn’t like the look. I’ve been trying to figure out how to do it. I haven’t finished the quilt top yet because I was stuck on how to sew on the rick rack. I would have never thought of this.
    Thanks, again!

  6. Angelia
    Posted May 14, 2009 at 11:08 am | Permalink

    I love rick rack, too, and with two daughters, have had the opportunity to purchase clothing with lots of rick rack :) Yes, it’s sewn down the middle, but a nice iron will flatten out that rick rack in a heartbeat. I do like your technique though and think any garment or project would benefit from the extra attention to detail.

  7. gabriella
    Posted February 4, 2010 at 9:45 pm | Permalink

    Thanks for the great idea: this worked perfectly.

  8. Kitty
    Posted February 11, 2010 at 7:17 pm | Permalink

    I’d use a regular zig zag adjusted to fit the tiny ricrac. one stitch in each corner, perfect in my book

  9. Posted January 5, 2012 at 3:08 am | Permalink

    I just added this web page to my bookmarks. I really like reading your posts. Thank you!

  10. Posted February 23, 2013 at 9:34 pm | Permalink

    Good post. I study one thing tougher on completely different blogs everyday. It is going to always be stimulating to read content from different writers and observe slightly one thing from their store. I’d prefer to use some with the content on my blog whether you don’t mind. Natually I’ll provide you with a link in your internet blog. Thanks for sharing.


One Trackback/Pingback

  1. [...] How to sew (big) rickrack, and wondering about the small kind, on Craft Nectar [...]

Post a Comment

Required fields are marked *
*
*

Follow

Get every new post delivered to your Inbox.

Join 2,858 other followers

%d bloggers like this: